Created: "July 24, 2014"

These circuits are designed to Test the High Voltage Output of a Car Ignition Coil.

I recommend using a Propery Charged Battery for these tests.

Note: Just Using a Battery Charger is NOT a Suitable Power Source
It MUST be connected to a Suitable Battery for it to work properly. 
Most Battery Chargers are NOT good DC POWER as they Contain a Lot of AC Ripple. 






 The Schematics


"GO BACK to my HOME Page"


All Imformation in this Article is "Copyright protected".

 Chemelec 
 *Copyright © 2014*